3M™ Full Facepiece Reusable Respirator

The 3M FF-300 Series is a reusable full face respirator (formerly the Scott Promask) that takes a single 3M DT-Series filter on a 40 mm thread, or connects to an approved powered air respirator using the appropriate breathing tube. Depending on the filter, it protects against gases, vapours and/or particulates, and it is certified to AS/NZS 1716:2012.

Features

• Facepiece made from a halo-butyl elastomer compound with high resistance to chemicals and ageing
• Wide T-bar sealing edge
• Transparent inner mask with two inhalation valves
• 5-point adjustable rubber harness with quick-release plastic buckles
• Speech diaphragm for clearer communication
• Sweat port in the chin pocket for comfort during long wear
• Wide panoramic polycarbonate visor, with a hard-coated scratch-resistant option
• Spectacle kit available
• Facepiece weight approx. 560 g

Compatible with

3M DT-Series particulate, gas and vapour, and combination filters (40 mm thread), and the PF-600E-ASB and PF2-600E-ASB powered air respirators.

Protection factors (AS/NZS 1715)

• With a P3 particulate filter: up to 100
• With a Class 1 gas and vapour filter: up to 50 (maximum 1000 ppm)
• With a Class 2 gas and vapour filter: up to 100 (maximum 5000 ppm)

Sizes

Small (FF-301) or Medium/Large (FF-302).

This respirator does not supply oxygen. Never use it where oxygen is below 19.5%, in IDLH atmospheres, against unknown contaminants or concentrations, or with facial hair that stops the mask sealing.