{"product_id":"ballantyne-tether-plate-claw-280","title":"Ballantyne Tether Plate Claw 280","description":"\u003cp class=\"p1\"\u003eThis tether plate is designed and tested to 15kN and is therefore rated as a single person fall arrest tether plate under AS\/NZS 1891.4. While this tether plate has been designed to attain a fall arrest rating, this device should always be used with a travel restraint technique.\u003c\/p\u003e \u003cp class=\"p2\"\u003e\u003cb\u003eTHIS TETHER PLATE IS NOT FITTED WITH AN INTERNAL ENERGY \u003c\/b\u003e\u003cb\u003eABSORBING DEVICE. AN ENERGY ABSORBING DEVICE MUST BE \u003c\/b\u003e\u003cb\u003eUSED IN CONJUNCTION WITH THIS TETHER PLATE.\u003c\/b\u003e\u003c\/p\u003e \u003cp class=\"p1\"\u003eThis tether plate IS suitable for: \u003c\/p\u003e \u003cul\u003e \u003cli class=\"p1\"\u003eUsers who are trained in height safety\u003c\/li\u003e \u003cli class=\"p1\"\u003eUse on roofs constructed with metal roof sheeting with a minimum base metal thickness of 0.42mm in Custom Orb. \u003c\/li\u003e \u003cli class=\"p1\"\u003eUse in working at heights in normal climatic conditions \u003c\/li\u003e \u003cli class=\"p1\"\u003e360 degree roof work \u003c\/li\u003e \u003cli class=\"p1\"\u003eDirect connection of personal fall-arrest equipment for a single person\u003c\/li\u003e \u003c\/ul\u003e \u003cp class=\"p1\"\u003eThis tether plate IS NOT suitable for and MUST NOT be used:\u003c\/p\u003e \u003cul\u003e \u003cli class=\"p1\"\u003eWithout training in height safety \u003c\/li\u003e \u003cli class=\"p1\"\u003eOn shingled, aluminium sheet, asbestos or decramastic roofs\u003c\/li\u003e \u003cli class=\"p1\"\u003eas an anchorage device for temporary horizontal life lines\u003c\/li\u003e \u003cli class=\"p1\"\u003eas an anchor point to lift equipment or restrain equipment\u003c\/li\u003e \u003cli class=\"p1\"\u003eas an abseil anchor\u003c\/li\u003e \u003cli class=\"p1\"\u003eor connected to by more than 1 person or more than 1 line\u003c\/li\u003e \u003c\/ul\u003e \u003cp class=\"p2\"\u003e\u003cb\u003eTHIS TETHER PLATE MUST NOT BE ALTERED OR \u003c\/b\u003e\u003cb\u003eMISUSED IN ANY WAY.\u003c\/b\u003e\u003c\/p\u003e \u003cp class=\"p1\"\u003eAlterations or misuse of this or any other device used in your safety system may result in serious injury or death.\u003c\/p\u003e \u003cp class=\"p2\"\u003e\u003cb\u003eTHIS TETHER PLATE IS ONLY ONE PART OF A SAFETY SYSTEM.\u003c\/b\u003e\u003c\/p\u003e \u003cp class=\"p1\"\u003eOther products\/devices must be used in conjunction with this tether plate in order to operate safely in travel restraint or fall arrest mode and such products\/devices must comply with AS\/NZS 1891.\u003c\/p\u003e \u003cp class=\"p1\"\u003e\u003cb\u003eEACH ITEM USED IN YOUR SAFETY SYSTEM SHOULD COME WITH \u003c\/b\u003e\u003cb\u003eITS OWN MAINTENANCE, SERVICING AND OPERATING INSTRUC\u003c\/b\u003e\u003cb\u003eTIONS.\u003c\/b\u003e\u003c\/p\u003e \u003cp class=\"p2\"\u003eYou must follow each set of instructions closely and carefully.\u003c\/p\u003e \u003ch5 class=\"p1\"\u003eTether Plate Inspection\u003c\/h5\u003e \u003cp class=\"p2\"\u003eImmediately before using this tether plate each time it must be inspected by a competent person to ensure that it is in a perfect, serviceable condition and operates correctly. The tether plate must be inspected for any worn or damaged parts, any signs of deterioration, any sharp edges, burrs, cracks or corrosion or any signs of being deformed (such as a shock loading, being dropped from a height or run over by a vehicle). The securing eye must not damaged or distorted in any way.\u003c\/p\u003e \u003cp class=\"p3\"\u003e\u003cb\u003eIF THE TETHER PLATE HAS BEEN USED TO ARREST A FALL OR \u003c\/b\u003e\u003cb\u003eUPON INSPECTION SHOWS ANY DEFECT IT MUST BE \u003c\/b\u003e\u003cb\u003eWITHDRAWN FROM SERVICE IMMEDIATELY\u003c\/b\u003e\u003c\/p\u003e \u003cp class=\"p2\"\u003eIn addition to the above, prior to entering this tether plate into service for the first time, a competent person must also inspect the tether plate and give particular attention to whether the tether plate has been correctly assembled and whether all component parts are present, including the instructions.\u003c\/p\u003e \u003cp class=\"p2\"\u003eIf you are in any doubt whatsoever about the condition of this tether plate, remove it from service immediately and replace it. You should also have this tether plate thoroughly inspected every 12 months by a competent person. This inspection should be completed and recorded in accordance with AS\/NZ 1891.4.\u003c\/p\u003e \u003cp class=\"p3\"\u003e\u003cb\u003eYOUR LIFE MAY DEPEND ON YOUR EQUIPMENT.\u003c\/b\u003e\u003c\/p\u003e \u003cp class=\"p2\"\u003eThe user should be fully aware of its history (use, storage, inspections etc). If this equipment is not for personal use (for example, being used by multiple users) we strongly recommend a systematic approach to inspection and record keeping. This should always be carried out by a competent person.\u003c\/p\u003e \u003ch5 class=\"p1\"\u003eRoof Inspection\u003c\/h5\u003e \u003cp class=\"p1\"\u003eThe roof sheeting to which this tether plate is to be attached should be capable of sustaining an ultimate load equal to or great than 15kN for single point connections as per AS\/NZS 1891.4. Any signs of excessive rust, missing or loose roof nails or screws, tears or splits in the metal or damaged sheets or purlins would all be strong indicators that the area is not safe for installation. If it is unclear to the height safety supervisor inspecting the roof that the anchorage system is not structurally adequate, it should be assessed by an engineer in accordance with AS\/NZS 1891.4.\u003c\/p\u003e \u003ch5\u003e\u003cb\u003eInstallation Instructions\u003c\/b\u003e\u003c\/h5\u003e \u003cp class=\"p3\"\u003e\u003cb\u003eTHIS TETHER PLATE MUST BE INSTALLED BY A COMPETENT \u003c\/b\u003e\u003cb\u003ePERSON PRIOR TO THE OPERATOR ATTACHING TO IT.\u003c\/b\u003e\u003c\/p\u003e \u003cp class=\"p1\"\u003ePositioning of the tether plate is crucial for safety.\u003c\/p\u003e \u003cp class=\"p1\"\u003eHeight of the fall and rope stretch should be carefully considered.\u003c\/p\u003e \u003cp class=\"p1\"\u003eUsers must be adequately trained and take care to adjust the safety line length to ensure that the user will not be able to fall off any edge of the roof. AS\/NZS 1891.4 sets out the safe use of anchors, in particular, safe access and avoiding lateral swing\u003cmeta charset=\"UTF-8\"\u003e\u003c\/p\u003e \u003cp class=\"p1\"\u003e\u003cb\u003eTO INSTALL TETHER PLATE FOLLOW \u003c\/b\u003e\u003cb\u003eTHESE STEPS:\u003c\/b\u003e\u003c\/p\u003e \u003cp class=\"p1\"\u003e\u003cb\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0267\/7719\/0594\/files\/Screenshot_2025-11-11_at_4.25.07_pm.png?v=1762838721\" alt=\"\" width=\"378\" height=\"409\"\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cp class=\"p1\"\u003e\u003cb\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0267\/7719\/0594\/files\/Screenshot_2025-11-11_at_4.25.29_pm.png?v=1762838750\" alt=\"\" width=\"375\" height=\"606\"\u003e\u003c\/b\u003e\u003c\/p\u003e \u003ch5 class=\"p1\"\u003e\u003cb\u003eMaintenance\u003c\/b\u003e\u003c\/h5\u003e \u003cp class=\"p2\"\u003e\u003cb\u003eWARNING – MAINTENANCE AND REASSEMBLY ARE TO BE \u003c\/b\u003e\u003cb\u003eCARRIED OUT BY A COMPETENT PERSON KNOWLEDGEABLE \u003c\/b\u003e\u003cb\u003eIN THE REPAIR AND MAINTENANCE OF THIS TETHER PLATE.\u003c\/b\u003e\u003c\/p\u003e \u003ch5 class=\"p1\"\u003e\u003cb\u003eStorage\u003c\/b\u003e\u003c\/h5\u003e \u003cp class=\"p3\"\u003eThis tether plate should not be subjected to unnecessary strain or pressure or to excessive heat, humidity or moisture. This tether plate must be protected from contact with sharp edges, corrosive substances and other possible causes of damage.\u003c\/p\u003e \u003cp class=\"p1\"\u003e\u003cb\u003eObsolescene\u003c\/b\u003e\u003c\/p\u003e \u003cp class=\"p3\"\u003eIf the tether plate has been used to arrest a fall or upon inspection shows any defect it must be withdrawn from service immediately.\u003c\/p\u003e \u003cp class=\"p1\"\u003e\u003cb\u003eDisclaimer \u0026amp; Condition Of Use\u003c\/b\u003e\u003c\/p\u003e \u003cp class=\"p3\"\u003eThe user of this tether plate must be competent and trained in height safety in accordance with AS\/NZS 1891.4 before using this device. The owner of this tether plate must ensure that tether plates are properly labelled and instructions for safe use and appropriate installation guidance are supplied to the user.\u003c\/p\u003e \u003cp class=\"p3\"\u003eNo responsibility will be accepted by Ballantyne Safety for damage, injury or death resulting from the use or misuse of this tether plate. \u003c\/p\u003e \u003cp class=\"p3\"\u003eThe user personally assumes the risks and responsibilities for any damage, injury or death which may result from using this tether plate. If you are not in a position or able to assume this responsibility or to take these risks, do not use this tether plate.\u003cmeta charset=\"UTF-8\"\u003e\u003c\/p\u003e \u003cp class=\"p1\"\u003e\u003cb\u003eWORKING AT HEIGHTS IS DANGEROUS \u003c\/b\u003e\u003cb\u003eAND IF DONE WITHOUT ADEQUATE \u003c\/b\u003e\u003cb\u003eTRAINING AND EQUIPMENT, MAY LEAD \u003c\/b\u003e\u003cb\u003eTO SEVERE INJURY OR EVEN DEATH\u003c\/b\u003e\u003c\/p\u003e \u003cp class=\"p2\"\u003eReading these instructions does not constitute competent training in working at heights or working with fall arrest or travel  \u003cmeta charset=\"UTF-8\"\u003erestraint systems or products. It is your responsibility to ensure with AS\/NZS 1891.4 and with a particular focus on using that you are competently trained to work at heights and, in this tether plate and the Ballantyne Safety T-Bar Roof Anchor, particular, in the use of fall arrest or travel restraint safety systems before using this tether plate.\u003c\/p\u003e \u003cp class=\"p3\"\u003e \u003c\/p\u003e","brand":"SKYLOTEC","offers":[{"title":"Default Title","offer_id":42223243853870,"sku":"BAL-TETHER-280","price":135.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0580\/6741\/9182\/files\/CLAW280.jpg?v=1775029057","url":"https:\/\/1stsafety.com.au\/products\/ballantyne-tether-plate-claw-280","provider":"1st Safety Pty Ltd.","version":"1.0","type":"link"}